jetkda.blogg.se - Download cisco tftp backup

In that case the output is: (Cisco Controller) >show ap image all It is possible predownload image to all APs: config ap image predownload primary all 0ĪP-CISCOZINE 8.8.111.0 8.10.130.0 None None NA NA AP03 8.8.111.0 8.5.131.0 None None NA NAĪs you notice, AP-CISCOZINE has completed the downloading of the new image into the backup space. 0ĪP Name Primary Image Backup Image Status Version Next Retry Time Retry Count PredownloadĪP-CISCOZINE 8.8.111.0 8.5.131.0 Predownloading 8.10.130.0 NA 0Īfter a few minutes: (Cisco Controller) >show ap image all To view the current status of the access point: (Cisco Controller) >show ap image all 8.5.131.0ĭownload the new release to the WLC (in that case 8.10.130.0): transfer download mode įor instance, to predownload the new image from the controller’s primary image to a Cisco access point (named AP-CISCOZINE): config ap image predownload primary AP-CISCOZINE CLI predownloadĬheck the current release: (Cisco Controller) >show boot The process is simple and be done via CLI or via GUI. To minimize network outages, you can predownload an image to the access point from the controller without resetting the access point or losing network connectivity. This process is very slow and can require several time. After the access point discovers the controller with the new image, the AP downloads the new image, resets, goes into discovery mode, and rejoins the controller.

Select Answer yes to any confirmation prompts.Normally, you need to upload the image to the controller and reset it to upgrade WLC/Aps this causes the access point to go into discovery mode.

Select Overwrite existing capture file.

Note the use of a forward slash in the filename to specify a subfolder within the TFTP Download folder.

%ctGroupName/%ctDeviceName-Config.txt: the file name to store config to on server.

192.168.1.200: the IP address of remote TFTP server.

Select List of commands to be entered on device and enter the following code: copy running tftp.

Enter a name and description, for example "Download Cisco IOS config to TFTP".

This example demonstrates how to use the commands activity to download the current running configuration of a Cisco IOS device to a TFTP server.

How to download Cisco IOS running config to TFTP server